Posted on

It’s Important to Monitor Your SEC Filing Status

As public companies grow, they may move from one filing status or issuer category to another. Recent and proposed changes to the Securities and Exchange Commission (SEC) rules for some categories could affect your company’s financial reporting and audit procedures.

Categories of public companies

Under existing rules, public companies fall into different filing categories, based on their public “float” (the amount of shares available to the public for trading):

  • Smaller reporting companies (SRCs) are nonaccelerated filers that meet certain other requirements, including annual revenues under $50 million if their public float is zero.
  • Nonaccelerated filers have a public float of less than $75 million and aren’t otherwise required to accelerate their filing deadlines.
  • Accelerated filers have a public float between $75 million and $700 million and meet other requirements.
  • Large accelerated filers have a public float of more than $700 million and meet certain other requirements.

Finally, there’s the emerging growth company (EGC). Generally, an EGC is a new public company that has gross revenues under $1 billion in its most recent fiscal year and meets certain other requirements. EGCs enjoy a variety of benefits during their first five years of existence, including scaled-back disclosures and exemption from the auditor attestation of a company’s internal control over financial reporting as required by Section 404(b) of the Sarbanes-Oxley Act.

A company that ceases to be an EGC must begin complying with Sec. 404(b), except for nonaccelerated filers, which are exempt from that requirement unless they become accelerated or large accelerated filers. (Congress currently is considering legislation that would extend the exemption for certain companies, however.)

Changes to public float thresholds

On June 28, 2018, the SEC voted unanimously to issue the final rule in Release No. 33-10513, Amendments to Smaller Reporting Company Definition. The rule increases the public float threshold for SRCs to $100 million and nonaccelerated filers to $250 million.

To complicate matters, the SEC did not make conforming changes to the definition of an accelerated filer. Rather, it eliminated the automatic exclusion of SRCs in the definitions of accelerated and large accelerated filers. As a result, a registrant could be both an SRC and an accelerated filer. As an accelerated filer, a company would still be required to comply with Sec. 404(b).

The new SEC rule will be effective 60 days after publication in the Federal Register, which normally occurs a few weeks after a rule is posted on the SEC’s website. The SEC said 966 additional companies will be eligible for smaller company status in the first year of the new threshold.

Annual assessment

Changes in filing status affect the form, content and timing of financial reports, as well as the extent of external audit procedures. So, it’s a good idea to re-evaluate your company’s status well before the end of each fiscal year. We can help you evaluate your filing status based on the SEC’s evolving guidelines. If a change is anticipated, we can help you prepare for new filing, disclosure and audit requirements.

© 2018

Posted on

Choosing the Right Accounting Method for Tax Purposes

The Tax Cuts and Jobs Act (TCJA) liberalized the eligibility rules for using the cash method of accounting, making this method — which is simpler than the accrual method — available to more businesses. Now the IRS has provided procedures a small business taxpayer can use to obtain automatic consent to change its method of accounting under the TCJA. If you have the option to use either accounting method, it pays to consider whether switching methods would be beneficial.

Cash vs. accrual

Generally, cash-basis businesses recognize income when it’s received and deduct expenses when they’re paid. Accrual-basis businesses, on the other hand, recognize income when it’s earned and deduct expenses when they’re incurred, without regard to the timing of cash receipts or payments.

In most cases, a business is permitted to use the cash method of accounting for tax purposes unless it’s:

1. Expressly prohibited from using the cash method, or
2. Expressly required to use the accrual method.

Cash method advantages

The cash method offers several advantages, including:

Simplicity. It’s easier and cheaper to implement and maintain.

Tax-planning flexibility. It offers greater flexibility to control the timing of income and deductible expenses. For example, it allows you to defer income to next year by delaying invoices or to shift deductions into this year by accelerating the payment of expenses. An accrual-basis business doesn’t enjoy this flexibility. For example, to defer income, delaying invoices wouldn’t be enough; the business would have to put off shipping products or performing services.

Cash flow benefits. Because income is taxed in the year it’s received, the cash method does a better job of ensuring that a business has the funds it needs to pay its tax bill.

Accrual method advantages

In some cases, the accrual method may offer tax advantages. For example, accrual-basis businesses may be able to use certain tax-planning strategies that aren’t available to cash-basis businesses, such as deducting year-end bonuses that are paid within the first 2½ months of the following year and deferring income on certain advance payments.

The accrual method also does a better job of matching income and expenses, so it provides a more accurate picture of a business’s financial performance. That’s why it’s required under Generally Accepted Accounting Principles (GAAP).

If your business prepares GAAP-compliant financial statements, you can still use the cash method for tax purposes. But weigh the cost of maintaining two sets of books against the potential tax benefits.

Making a change

Keep in mind that cash and accrual are the two primary tax accounting methods, but they’re not the only ones. Some businesses may qualify for a different method, such as a hybrid of the cash and accrual methods.

If your business is eligible for more than one method, we can help you determine whether switching methods would make sense and can execute the change for you if appropriate.

© 2018

Posted on

Transitioning to Remote Audits


Are you comfortable communicating electronically with your auditors? If so, a logical next step might be to transition from on-site audit procedures to a more “remote” approach. Remote audits can help reduce the time and cost of preparing audited financial statements.

21st century audits

Traditionally, audit fieldwork has involved a team of auditors camping out for weeks (or even months) in one of the conference rooms at the headquarters of the company being audited. Now, thanks to technological advances — including cloud storage, smart devices and secure data-sharing platforms — many audit firms are testing the feasibility of remote auditing as a replacement for sending auditors on-site.

In addition to saving time and audit fees, allowing auditors to work remotely improves the work-life balance for auditors and in-house accounting personnel. Your employees won’t need to stay glued to their desks for the duration of the audit, because they can respond to the auditor’s inquiries and document requests remotely.

Best practices

Changing the format of an audit requires flexibility, including a willingness to embrace the technology needed to facilitate the exchange, review and analysis of relevant documents. You can facilitate the transition process by:

Being responsive to electronic requests. Auditors who are out of sight shouldn’t be out of mind. Answer all remote requests from your auditors in a timely manner. If a key employee will be on vacation or out of the office for an extended period, give the audit team the contact information for the key person’s backup.

Giving employees access to the requisite software. Sharing documents with remote auditors may require you to install specific software on employees’ computers. But your company’s policies may prohibit employees from downloading software without approval from the IT department.

Before remote auditors start “fieldwork,” ask for a list of software and platforms that will be used to interact with in-house personnel. Give the appropriate employees access and authorization to share audit-related data from your company’s systems. Work with IT specialists to address any security concerns they may have with sharing data with the remote auditors.

Tracking audit progress. With less face-to-face time with your auditors, you have fewer opportunities to receive updates on the team’s progress. Ask the engagement partner to explain how they’ll track the performance of their remote auditors, and how they plan to communicate the team’s progress to in-house accounting personnel.

Wave of the future

Like remote working arrangements with employees and contractors, remote audits are a growing trend that could potentially reduce the costs of preparing financial statements. But not every audit firm or business is ready to embrace remote auditing. Contact us to discuss ways to make next year’s audit more efficient and cost-effective.

© 2018

Posted on

Close-Up on the New QBI Deduction’s Wage Limit

The Tax Cuts and Jobs Act (TCJA) provides a valuable new tax break to noncorporate owners of pass-through entities: a deduction for a portion of qualified business income (QBI). The deduction generally applies to income from sole proprietorships, partnerships, S corporations and, typically, limited liability companies (LLCs). It can equal as much as 20% of QBI. But once taxable income exceeds $315,000 for married couples filing jointly or $157,500 for other filers, a wage limit begins to phase in.

Full vs. partial phase-in

When the wage limit is fully phased in, at $415,000 for joint filers and $207,500 for other filers, the QBI deduction generally can’t exceed the greater of the owner’s share of:

  • 50% of the amount of W-2 wages paid to employees during the tax year, or
  • The sum of 25% of W-2 wages plus 2.5% of the cost of qualified business property (QBP).

When the wage limit applies but isn’t yet fully phased in, the amount of the limit is reduced and the final deduction is calculated as follows:

1. The difference between taxable income and the applicable threshold is divided by $100,000 for joint filers or $50,000 for other filers.
2. The resulting percentage is multiplied by the difference between the gross deduction and the fully wage-limited deduction.
3. The result is subtracted from the gross deduction to determine the final deduction.

Some examples

Let’s say Chris and Leslie have taxable income of $600,000. This includes $300,000 of QBI from Chris’s pass-through business, which pays $100,000 in wages and has $200,000 of QBP. The gross deduction would be $60,000 (20% of $300,000), but the wage limit applies in full because the married couple’s taxable income exceeds the $415,000 top of the phase-in range for joint filers. Computing the deduction is fairly straightforward in this situation.

The first option for the wage limit calculation is $50,000 (50% of $100,000). The second option is $30,000 (25% of $100,000 + 2.5% of $200,000). So the wage limit — and the deduction — is $50,000.

What if Chris and Leslie’s taxable income falls within the phase-in range? The calculation is a bit more complicated. Let’s say their taxable income is $400,000. The full wage limit is still $50,000, but only 85% of the full limit applies:

($400,000 taxable income – $315,000 threshold)/$100,000 = 85%

To calculate the amount of their deduction, the couple must first calculate 85% of the difference between the gross deduction of $60,000 and the fully wage-limited deduction of $50,000:

($60,000 – $50,000) × 85% = $8,500

That amount is subtracted from the $60,000 gross deduction for a final deduction of $51,500.

That’s not all

Be aware that another restriction may apply: For income from “specified service businesses,” the QBI deduction is reduced if an owner’s taxable income falls within the applicable income range and eliminated if income exceeds it. Please contact us to learn whether your business is a specified service business or if you have other questions about the QBI deduction.

© 2018

Posted on

Using Analytical Procedures in An Audit Provides Many Benefits

Analytical procedures can make audits more efficient and effective. First, they can help during the planning and review stages of the audit. But analytics can have an even bigger impact when used to supplement substantive testing during fieldwork.

Defining audit analytics

AICPA auditing standards define analytical procedures as “evaluations of financial information through analysis of plausible relationships among both financial and nonfinancial data.” Analytical procedures also investigate “identified fluctuations or relationships that are inconsistent with other relevant information or that differ from expected values by a significant amount.” Examples of analytical tests include trend, ratio and regression analysis.

Using analytical procedures

During fieldwork, auditors can use analytical procedures to obtain evidence, sometimes in combination with other substantive testing procedures, that identifies misstatements in account balances. Analytical procedures are often more efficient than traditional, manual audit testing procedures that typically require the business being audited to produce significant paperwork. Traditional procedures also usually require substantial time to verify account balances and transactions.

Analytical procedures generally follow these five steps:

1. Form an independent expectation about an account balance or financial relationship.
2. Identify differences between expected and reported amounts.
3. Investigate the most probable cause(s) of any discrepancies.
4. Evaluate the likelihood of material misstatement.
5. Determine the nature and extent of any additional auditing procedures needed.

When using analytical procedures, the auditor must establish a threshold that can be accepted without further investigation. This threshold is a matter of professional judgment, but it’s influenced primarily by the concept of materiality and the desired level of assurance.

For differences that are due to misstatement (rather than a plausible explanation), the auditor must decide whether the misstatement is material (individually or in the aggregate). Material misstatements typically require adjustments to the amount reported and may also necessitate additional audit procedures to determine the scope of the misstatement.

Your role in audit analytics

Done right, analytical procedures can help make your audit less time-consuming, less expensive and more effective at detecting errors and omissions. But it’s important to notify your auditor about any major changes to your operations, accounting methods or market conditions that occurred during the current accounting period.

This insight can help auditors develop more reliable expectations for analytical testing and identify plausible explanations for significant changes from the balance reported in prior periods. Moreover, now that you understand the role analytical procedures play in an audit, you can anticipate audit inquiries, prepare explanations and compile supporting documents before fieldwork starts.

© 2018

Posted on

Does Your Business have To Begin Collecting Sales Tax On All Out-Of-State Online Sales?

You’ve probably heard about the recent U.S. Supreme Court decision allowing state and local governments to impose sales taxes on more out-of-state online sales. The ruling in South Dakota v. Wayfair, Inc. is welcome news for brick-and-mortar retailers, who felt previous rulings gave an unfair advantage to their online competitors. And state and local governments are pleased to potentially be able to collect more sales tax.

But for businesses with out-of-state online sales that haven’t had to collect sales tax from out-of-state customers in the past, the decision brings many questions and concerns.

What the requirements used to be

Even before Wayfair, a state could require an out-of-state business to collect sales tax from its residents on online sales if the business had a “substantial nexus” — or connection — with the state. The nexus requirement is part of the Commerce Clause of the U.S. Constitution.

Previous Supreme Court rulings had found that a physical presence in a state (such as retail outlets, employees or property) was necessary to establish substantial nexus. As a result, some online retailers have already been collecting tax from out-of-state customers, while others have not had to.

What has changed

In Wayfair, South Dakota had enacted a law requiring out-of-state retailers that made at least 200 sales or sales totaling at least $100,000 in the state to collect and remit sales tax. The Supreme Court found that the physical presence rule is “unsound and incorrect,” and that the South Dakota tax satisfies the substantial nexus requirement.

The Court said that the physical presence rule puts businesses with a physical presence at a competitive disadvantage compared with remote sellers that needn’t charge customers for taxes.

In addition, the Court found that the physical presence rule treats sellers differently for arbitrary reasons. A business with a few items of inventory in a small warehouse in a state is subject to sales tax on all of its sales in the state, while a business with a pervasive online presence but no physical presence isn’t subject to the same tax for the sales of the same items.

What the decision means

Wayfair doesn’t necessarily mean that you must immediately begin collecting sales tax on online sales to all of your out-of-state customers. You’ll be required to collect such taxes only if the particular state requires it. Some states already have laws on the books similar to South Dakota’s, but many states will need to revise or enact legislation.

Also keep in mind that the substantial nexus requirement isn’t the only principle in the Commerce Clause doctrine that can invalidate a state tax. The others weren’t argued in Wayfair, but the Court observed that South Dakota’s tax system included several features that seem designed to prevent discrimination against or undue burdens on interstate commerce, such as a prohibition against retroactive application and a safe harbor for taxpayers who do only limited business in the state.

Please contact us with any questions you have about sales tax collection requirements.

© 2018

Posted on

Auditing Related-Party Transactions

Business owners generally prefer to work with entities they know and trust. But related-party transactions can provide opportunities for individuals to act in a manner that’s inconsistent with the interests of shareholders. That’s why auditors take pains to identify and properly address related-party transactions.

What is a related party?

Accounting Standards Codification (ASC) Topic 850 defines a related-party transaction as one that takes place between:

  • A parent entity and its subsidiaries,
  • Subsidiaries of a common parent,
  • An entity and trusts for the benefit of its employees, such as pension and profit-sharing trusts that are managed by or under the trusteeship of the entity’s management,
  • An entity and its principal owners and managers (or members of their immediate families), and
  • Affiliated entities.

What’s the risk?

Related-party transactions sometimes involve contracts for goods or services that are priced at less (or more) favorable terms than those in similar arm’s length transactions between unrelated third parties. For example, a spinoff business might lease office space from its parent company at below-market rates. Or a closely held manufacturer might pay the owner’s son an above-market salary and various perks that aren’t available to unrelated employees.

How do auditors address these transactions?

Given the potential for double dealing with related parties, auditors spend significant time hunting for undisclosed related-party transactions. Examples of documents and data sources that can help uncover these transactions are:

  • A list of the company’s current related parties and associated transactions,
  • Minutes from board of directors’ meetings, particularly when the board discusses significant business transactions,
  • Disclosures from board members and senior executives regarding their ownership of other entities, participation on additional boards and previous employment history,
  • Bank statements, especially transactions involving intercompany wires, automated clearing house (ACH) transfers, and check payments, and
  • Press releases announcing significant business transactions with related parties.

Audit procedures that target related-party transactions include 1) testing how related-party transactions are identified and coded in the company’s enterprise resource planning (ERP) system, 2) interviewing accounting personnel responsible for reporting related-party transactions in the company’s financial statements, and 3) analyzing presentation of related-party transactions in financial statements.

Accurate, complete reporting of these transactions requires robust internal controls. A company’s vendor approval process should provide guidelines to help accounting personnel determine whether a supplier qualifies as a related party and mark it accordingly in the ERP system. Without the right mechanisms in place, a company may inadvertently omit a disclosure about a related-party transaction.

Get it right

Undisclosed related-party transactions can raise a red flag to lenders and investors — and may even require a business to restate its financial results. Our auditors are committed to finding, disclosing and reporting these transactions in a transparent manner that complies with U.S. Generally Accepted Accounting Principles (GAAP). Contact us for help.

© 2018

Posted on

Short Bits

BUSINESS COSTS UP

The Producer Price Index (PPI) increased 3.3% for the 12 months ending July 2018. The PPI measures the average change over time in the prices received by domestic producers, or wholesalers, for their output. Movement in this indicator could prove an early sign of increasing (or falling) consumer prices.

EMPLOYEE COMPENSATION UP

Compensation costs for private industry workers increased 2.9% in the year ending June 2018. Over the same period, wages and salaries increased 2.9% and benefits costs increased 2.8%. Employment costs have risen steadily during the past two years.

COLLEGE MAJORS OFFERING THE BEST START

According to research released by the Federal Reserve Bank of New York this year, it pays to major in engineering. Practitioners in aerospace, chemical, computer and electrical engineering all earn a median of $100,000 or more mid-career. Mechanical engineers just missed, with a median income of $98,000. Pharmacy majors topped the list with a median income of $115,000. Biochemistry and physics majors had the highest percentage of graduate school degrees at 71% and 70.6%, respectively.

UP IN SMOKE

A Gallup Poll shows the lowest rate of smoking (16%) since the question was first asked in a 1944 poll, when smoking rates were in the 40%-and-higher range. This drop is not only good health news but also good financial news for individuals who buy and companies that offer health insurance, as smoking is one of the leading causes of runaway healthcare costs.

Posted on

Questions And Answers

Question:

The IRS informed me it’s auditing my company. What should I do?

Answer:

Your first step should involve talking to your accounting professional, who can offer advice that fits your situation. If you keep good records and receipts of expenses and income, the audit should go smoothly. It may involve nothing more than receiving a notice by mail and answering concerns by mail within 30 days. Be aware that the first notice of an audit happens only by mail, not by phone. In-person meetings, if required, may be held in your business, an IRS office or your accountant’s office.

Question:

Do the new tax laws give me more time to repay my 401(k) plan loan?

Answer:

Yes, they do. A new provision that flew under the radar during the recent federal tax overhaul is one that changes the deadline for repaying a 401(k) loan. When a 401(k) loan term expires, often after five years, the IRS typically treats the unpaid loan amount as a distribution for tax purposes. Additionally, the deadline for paying these loans in full is only 60 days if you left the company. But for loans treated as distributions due to employment termination in 2018 and later, the repayment period is now the due date of your federal income tax return, including any extensions.

Posted on

Life Happens

As unpleasant as it is to think about, there is a chance that the need to provide for your family could last longer than your ability to do so. If you understand the value of life insurance but find the choices challenging, the following introduction may help:

TERM INSURANCE

Life insurance falls into two basic categories: term and permanent. Term insurance lasts, as its name implies, for a specified term and offers only a death benefit. It works well as a temporary solution if, for example, you want coverage only while you pay off a short-term loan. It is also less expensive for younger people, but can become prohibitively expensive with age. Whether you buy an annual renewable or a level-term policy, the premiums will likely be higher when you renew coverage.

PERMANENT LIFE INSURANCE

On the other hand, permanent insurance offers both a death benefit and cash value, and you can keep it for as long as you make premium payments. It also can function as a vehicle to force savings, as the policy can typically build cash value. Although its premium is typically higher than that of a term policy early on, permanent life insurance premium payments remain the same for as long as you own the policy and make premium payments on time.

Work with an insurance professional to choose the policy and insurance company that’s right for you.